Component Atlas

Wearable Biosensors & Monitoring

Skin contact adhesives, flex circuits, microneedle arrays, and BLE modules.

18 categories | Component Atlas › Wearable Biosensors & Monitoring

How can we improve? — not open yet

☰ Jump to Component (18) ▾

18 components

Skin Interface & Sensing

Medical Skin Adhesives
Biosensing Electrodes
Continuous Sensing Microneedles
Solid Electrolyte Hydrogels
Medical Snap Studs & Eyelets
Continuous Glucose Monitoring Sensors
Medical-Grade Closed-Cell Foam Tapes

Protective Enclosure

Seals & O-Rings
Machined Components
Oleophobic Acoustic Vents
Coin-Cell Leaf Spring Contacts
Moisture-Vapor Permeable TPU Films

Component Catalog & Supplier Offerings

Click any component in the visual grid above to jump to its engineering specifications and listed suppliers below. Click any supplier row for its stated focus, the evidence behind its rating, and one-click RFQ formulation.

Listed from public sources. Not contacted or endorsed by 10xAnd. Evidence ratings count checks against public sources — how they work.

Medical Skin Adhesives

↑ Grid

Key Specs: wear time, MVTR, peel force

Breathable hydrocolloid and gentle-release silicone adhesives securing wearable monitors to skin for 7–14 days.

Supplier	Stated Capabilities & Technical Focus	Procurement
Avery Dennison Medical Mentor, OH, USA / Turnhout, Belgium	Polyurethane hydrocolloid films and breathable moisture vapor transmission (MVTR) tapes ISO 13485 stated on site FDA registered · FEI 3006506075	RFQ ›
Medical Skin Adhesives Avery Dennison Medical — Medical Skin Adhesives Engineering Profile Polyurethane hydrocolloid films and breathable moisture vapor transmission (MVTR) tapes Key Specs: wear time, MVTR, peel force Facility: Mentor, OH, USA / Turnhout, Belgium Visit Avery Dennison Medical website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “Partnering to bring medical devices to market” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: adhesive, skin · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “Longford Certificate of Registration ISO 13485 and EN” · source ↗ · checked 2026-10-20 FDA establishment registration — found Registered as Avery Dennison Medical Ltd.: FEI 3006506075; Contract Manufacturer, Repackager/Relabeler, Manufacturer; Longford, IE · FDA record ↗ · site named on company’s own page ↗ · checked 2026-10-20
Scapa Healthcare (SWM) Windsor, CT, USA / Gargrave, UK	Gentle-release hydrogel and silicone gel skin adhesives for sensitive patient monitoring ISO 13485 stated on site	RFQ ›
Medical Skin Adhesives Scapa Healthcare (SWM) — Medical Skin Adhesives Engineering Profile Gentle-release hydrogel and silicone gel skin adhesives for sensitive patient monitoring Key Specs: wear time, MVTR, peel force Facility: Windsor, CT, USA / Gargrave, UK Visit Scapa Healthcare (SWM) website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “healthcare and consumer medical device outsource partner” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: adhesives, skin · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “an ISO9001 and ISO13485 registered Healthcare Contract Manufacturer” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: CT. what was checked ↗ · checked 2026-10-20
3M Medical Materials & Technologies St. Paul, MN, USA	Biocompatible silicone and acrylate adhesives FDA registered · FEI 2110898	RFQ ›
Medical Skin Adhesives 3M Medical Materials & Technologies — Medical Skin Adhesives Engineering Profile Biocompatible silicone and acrylate adhesives Key Specs: wear time, MVTR, peel force Facility: St. Paul, MN, USA Visit 3M Medical Materials & Technologies website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — not checked blocked automated access (HTTP 403). Could not be checked, so it counts neither way. Site says it serves medical devices — not checked site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. FDA establishment registration — found Registered as 3M COMPANY: FEI 2110898; Complaint File Establishment, Specification Developer, Manufacturer; Saint Paul, MN · FDA record ↗ · checked 2026-10-20

Biosensing Electrodes

↑ Grid

Key Specs: Ag/AgCl, impedance, active area

Screen-printed electrochemical and conductive gel electrode arrays for continuous physiological and biochemical sensing.

Supplier	Stated Capabilities & Technical Focus	Procurement
Conductive Technologies York, PA, USA	Electrochemical biosensor deposition, enzyme immobilization on printed electrodes ISO 13485 stated on site FDA registered · FEI 3004539335	RFQ ›
Biosensing Electrodes Conductive Technologies — Biosensing Electrodes Engineering Profile Electrochemical biosensor deposition, enzyme immobilization on printed electrodes Key Specs: Ag/AgCl, impedance, active area Facility: York, PA, USA Visit Conductive Technologies website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “Manufacturing Partner for Medical Device and Industrial” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: biosensors · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “is Certified to ISO 9001 and ISO 13485” · source ↗ · checked 2026-10-20 FDA establishment registration — found Registered as CONDUCTIVE TECHNOLOGIES, INC.: FEI 3004539335; Contract Manufacturer; York, PA · FDA record ↗ · checked 2026-10-20
ScreenTec Oulu, Finland	Screen-printed Ag/AgCl electrochemical sensing arrays, carbon paste conductive traces ISO 13485 stated on site FDA registered · FEI 3013164281	RFQ ›
Biosensing Electrodes ScreenTec — Biosensing Electrodes Engineering Profile Screen-printed Ag/AgCl electrochemical sensing arrays, carbon paste conductive traces Key Specs: Ag/AgCl, impedance, active area Facility: Oulu, Finland Visit ScreenTec website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “manufacture of next-generation medical devices that transform” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: electrodes · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485 -certified.” · source ↗ · checked 2026-10-20 FDA establishment registration — found Registered as SCREENTEC OY: FEI 3013164281; Contract Manufacturer; Oulu, Finland Pohjois-Pohjanmaa, FI · FDA record ↗ · checked 2026-10-20
Ambu A/S Ballerup, Denmark	High-signal conductive hydrogel electrode assemblies for ECG and bio-impedance FDA registered · FEI 3002806359	RFQ ›
Biosensing Electrodes Ambu A/S — Biosensing Electrodes Engineering Profile High-signal conductive hydrogel electrode assemblies for ECG and bio-impedance Key Specs: Ag/AgCl, impedance, active area Facility: Ballerup, Denmark Visit Ambu A/S website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “are a global MedTech company that delivers” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: electrodes · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — found Registered as Ambu A/S: FEI 3002806359; Foreign Private Label Distributor, Specification Developer, Foreign Exporter; Ballerup Hovedstaden, DK · FDA record ↗ · checked 2026-10-20

Continuous Sensing Microneedles

↑ Grid

Key Specs: micro-pillar height, electrochemical, ISF

Silicon or polymer micro-pillar arrays penetrating the stratum corneum to access dermal interstitial fluid for pain-free continuous analyte tracking.

Supplier	Stated Capabilities & Technical Focus	Procurement
Resonetics Nashua, NH, USA	Femtosecond laser ablation of hollow and solid microneedle continuous sensing arrays ISO 13485 stated on site	RFQ ›
Continuous Sensing Microneedles Resonetics — Continuous Sensing Microneedles Engineering Profile Femtosecond laser ablation of hollow and solid microneedle continuous sensing arrays Key Specs: micro-pillar height, electrochemical, ISF Facility: Nashua, NH, USA Visit Resonetics website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “production, Resonetics furthers MedTech innovation through advanced” · source ↗ · checked 2026-10-20 Site names this capability — not found information only, not scored This category’s capability terms were not all found on the pages read. Looked for: “microneedle…” or “micro-needle…”. what was checked ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: NH. what was checked ↗ · checked 2026-10-20
Corium, Inc. Grand Rapids, MI, USA	Polymer and silicon microneedle array fabrication for dermal fluid extraction	RFQ ›
Continuous Sensing Microneedles Corium, Inc. — Continuous Sensing Microneedles Engineering Profile Polymer and silicon microneedle array fabrication for dermal fluid extraction Key Specs: micro-pillar height, electrochemical, ISF Facility: Grand Rapids, MI, USA Visit Corium, Inc. website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “across the pharmaceutical and medical device industries.” · source ↗ · checked 2026-10-20 Site names this capability — not found information only, not scored This category’s capability terms were not all found on the pages read. Looked for: “microneedle…” or “micro-needle…”. what was checked ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 8 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MI. what was checked ↗ · checked 2026-10-20
3M Medical Materials St. Paul, MN, USA	Microstructured transdermal systems and hollow microneedle arrays FDA registered · FEI 2110898	RFQ ›
Continuous Sensing Microneedles 3M Medical Materials — Continuous Sensing Microneedles Engineering Profile Microstructured transdermal systems and hollow microneedle arrays Key Specs: micro-pillar height, electrochemical, ISF Facility: St. Paul, MN, USA Visit 3M Medical Materials website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — not checked blocked automated access (HTTP 403). Could not be checked, so it counts neither way. Site says it serves medical devices — not checked site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. FDA establishment registration — found Registered as 3M COMPANY: FEI 2110898; Complaint File Establishment, Specification Developer, Manufacturer; Saint Paul, MN · FDA record ↗ · checked 2026-10-20

Solid Electrolyte Hydrogels

↑ Grid

Key Specs: skin impedance, biocompatible, residue-free

Ionic polymer hydrogel sheets providing low-impedance electrical interface between skin and biopotential recording electrodes.

Supplier	Stated Capabilities & Technical Focus	Procurement
Katecho Des Moines, IA, USA	Custom electrolyte skin-contact hydrogels with low skin impedance and gentle peel ISO 13485 stated on site FDA registered · FEI 1930027	RFQ ›
Solid Electrolyte Hydrogels Katecho — Solid Electrolyte Hydrogels Engineering Profile Custom electrolyte skin-contact hydrogels with low skin impedance and gentle peel Key Specs: skin impedance, biocompatible, residue-free Facility: Des Moines, IA, USA Visit Katecho website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “We are a contract medical manufacturing company.” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: hydrogel · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “It is ISO 13485:2016 certified.” · source ↗ · checked 2026-10-20 FDA establishment registration — found Registered as KATECHO LLC: FEI 1930027; Contract Manufacturer; Des Moines, IA · FDA record ↗ · checked 2026-10-20
Scapa Healthcare Windsor, CT, USA	Biocompatible conductive adhesive hydrogels for ECG and continuous monitoring ISO 13485 stated on site	RFQ ›
Solid Electrolyte Hydrogels Scapa Healthcare — Solid Electrolyte Hydrogels Engineering Profile Biocompatible conductive adhesive hydrogels for ECG and continuous monitoring Key Specs: skin impedance, biocompatible, residue-free Facility: Windsor, CT, USA Visit Scapa Healthcare website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “healthcare and consumer medical device outsource partner” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: hydrogels · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “an ISO9001 and ISO13485 registered Healthcare Contract Manufacturer” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: CT. what was checked ↗ · checked 2026-10-20
Sekisui Diagnostics Burlington, MA, USA	Long-term wear conductive hydrogel sheets for biosensing patches FDA registered · FEI 1000520007	RFQ ›
Solid Electrolyte Hydrogels Sekisui Diagnostics — Solid Electrolyte Hydrogels Engineering Profile Long-term wear conductive hydrogel sheets for biosensing patches Key Specs: skin impedance, biocompatible, residue-free Facility: Burlington, MA, USA Visit Sekisui Diagnostics website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “manufacturer of in vitro diagnostics or pharmaceutical” · source ↗ · checked 2026-10-20 Site names this capability — not found information only, not scored This category’s capability terms were not all found on the pages read. Looked for: “hydrogel…”. what was checked ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. Closest wording found: “ISO13485, 9001, 14001, CMDCAS, FDA Facility Registration and”, not counted (no certification wording bound to the mention). what was checked ↗ · checked 2026-10-20 FDA establishment registration — found Registered as Sekisui Diagnostics, LLC: FEI 1000520007; Repackager/Relabeler, Complaint File Establishment, Manufacturer, Export-Only Manufacturer, Contract Manufacturer, Specification Developer; San Diego, CA · FDA record ↗ · site named on company’s own page ↗ · checked 2026-10-20

Medical Snap Studs & Eyelets

↑ Grid

Key Specs: nickel-plated brass, Ag/AgCl post, DIN 4mm snap

Standardized circular metal snap studs staked through electrode substrates providing quick mechanical and electrical mating to patient cable leads.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Continuous Glucose Monitoring Sensors

↑ Grid

Key Specs: platinum wire working electrode, GOx enzyme, semipermeable coat

Subcutaneous flexible sensor filaments carrying immobilized glucose oxidase enzyme and mass-transfer limiting polyurethane membranes for continuous interstitial monitoring.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Medical-Grade Closed-Cell Foam Tapes

↑ Grid

Key Specs: polyethylene foam, breathable acrylic adhesive, ISO 10993

Conformable, water-resistant polyethylene and polyurethane foam tapes coated with hypoallergenic pressure-sensitive adhesives for multi-day wearable attachment.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Flexible Sensor Circuits

↑ Grid

Key Specs: layers, line/space, gold finish

Polyimide flexible printed circuits (FPC) routing signals between sensors, batteries, and BLE wireless processors.

Supplier	Stated Capabilities & Technical Focus	Procurement
Cicor Group Boudry, Switzerland	Ultra-thin polyimide micro-flex substrates ISO 13485 stated on site	RFQ ›
Flexible Sensor Circuits Cicor Group — Flexible Sensor Circuits Engineering Profile Ultra-thin polyimide micro-flex substrates Key Specs: layers, line/space, gold finish Facility: Boudry, Switzerland Visit Cicor Group website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “the fields of medical technology, industry, and” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: flexible printed · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “facilities are certified to ISO 13485 and ISO” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: CH. what was checked ↗ · checked 2026-10-20
Minco Products Minneapolis, MN, USA	Flex circuits with integrated sensor traces, stiffeners, and fine-pitch connector terminations	RFQ ›
Flexible Sensor Circuits Minco Products — Flexible Sensor Circuits Engineering Profile Flex circuits with integrated sensor traces, stiffeners, and fine-pitch connector terminations Key Specs: layers, line/space, gold finish Facility: Minneapolis, MN, USA Visit Minco Products website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “outer space to medical devices at the” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: flex circuits · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 9 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MN. what was checked ↗ · checked 2026-10-20
Multek (WNC) Zhuhai, China / Northfield, MN, USA	High-density interconnect (HDI) flexible printed circuits (FPC) with gold contact pads	RFQ ›
Flexible Sensor Circuits Multek (WNC) — Flexible Sensor Circuits Engineering Profile High-density interconnect (HDI) flexible printed circuits (FPC) with gold contact pads Key Specs: layers, line/space, gold finish Facility: Zhuhai, China / Northfield, MN, USA Visit Multek (WNC) website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “Medical instruments and device customers require reliable,” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: flexible circuits · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 9 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MN, CN. what was checked ↗ · checked 2026-10-20

Cables

↑ Grid

Key Specs: conductors, shield, jacket

Multi-conductor assemblies. Conductor count and gauge set the electrical job; the jacket and shield usually get chosen by what the cable has to survive rather than what it has to carry.

Supplier	Stated Capabilities & Technical Focus	Procurement
Amphenol Alden Products Brockton, MA, USA	Custom medical cable assemblies, low-noise shielded patient monitoring leads ISO 13485 stated on site FDA registered · FEI 3007029079	RFQ ›
Cables Amphenol Alden Products — Cables Engineering Profile Custom medical cable assemblies, low-noise shielded patient monitoring leads Key Specs: conductors, shield, jacket Facility: Brockton, MA, USA Visit Amphenol Alden Products website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “Linking Patients With Life-Saving Medical Technology” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: cable · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO13485:2016 certified at all facilities” · source ↗ · checked 2026-10-20 FDA establishment registration — found Registered as AMPHENOL ALDEN PRODUCTS COMPANY: FEI 3007029079; Contract Manufacturer; Hermosillo Sonora, MX · FDA record ↗ · site named on company’s own page ↗ · checked 2026-10-20
TE Connectivity Berwyn, PA, USA / Galway, Ireland	High-density micro-coaxial cable bundles for ultrasound and endoscopy probes ISO 13485 stated on site	RFQ ›
Cables TE Connectivity — Cables Engineering Profile High-density micro-coaxial cable bundles for ultrasound and endoscopy probes Key Specs: conductors, shield, jacket Facility: Berwyn, PA, USA / Galway, Ireland Visit TE Connectivity website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “factories, utility networks, medical devices, and AI” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: cables · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485:2016” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: PA, IE. what was checked ↗ · checked 2026-10-20
Minnesota Wire & Cable minnesotawire.com Website did not answer as this company on 2026-10-20 St. Paul, MN, USA	Fine-wire flex cables, carbon fiber conductors, radiofrequency ablation harnesses	RFQ ›
Cables Minnesota Wire & Cable — Cables Engineering Profile Fine-wire flex cables, carbon fiber conductors, radiofrequency ablation harnesses Key Specs: conductors, shield, jacket Facility: St. Paul, MN, USA minnesotawire.com Website did not answer as this company on 2026-10-20 DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — no answer The listed website did not return this company’s own page on the check date. (redirects to ereleases.com, which does not name Minnesota Wire & Cable) minnesotawire.com, not linked · checked 2026-10-20 Site says it serves medical devices — not checked no page read names the company, so its statements are not this company’s. Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored no page read names the company, so its statements are not this company’s. Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked no page read names the company, so its statements are not this company’s. Could not be checked, so it counts neither way. FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MN. what was checked ↗ · checked 2026-10-20

Kinetic Energy Harvesting Films

↑ Grid

Key Specs: PVDF membrane, voltage output, flexible

Flexible piezoelectric fluoropolymer films converting body movement, heartbeat, or diaphragm motions into electrical battery charging current.

Supplier	Stated Capabilities & Technical Focus	Procurement
PI Ceramic Lederhose, Germany / Auburn, MA, USA	Flexible piezoceramic composite patches for biomechanical kinetic harvesting	RFQ ›
Kinetic Energy Harvesting Films PI Ceramic — Kinetic Energy Harvesting Films Engineering Profile Flexible piezoceramic composite patches for biomechanical kinetic harvesting Key Specs: PVDF membrane, voltage output, flexible Facility: Lederhose, Germany / Auburn, MA, USA Visit PI Ceramic website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “The following medical instruments for minimally-invasive therapy” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: piezo · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MA, DE. what was checked ↗ · checked 2026-10-20
Smart Material Corp. Sarasota, FL, USA	Macro-fiber composite (MFC) flexible piezoelectric energy harvester patches	RFQ ›
Kinetic Energy Harvesting Films Smart Material Corp. — Kinetic Energy Harvesting Films Engineering Profile Macro-fiber composite (MFC) flexible piezoelectric energy harvester patches Key Specs: PVDF membrane, voltage output, flexible Facility: Sarasota, FL, USA Visit Smart Material Corp. website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — not found No statement that it serves medical devices or medical device makers was found on the pages read. (no medical-market phrase in page body on 9 pages read) what was checked ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: piezoelectric · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 9 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: FL. what was checked ↗ · checked 2026-10-20
Piezotech (Arkema Group) piezotech.com Website did not answer as this company on 2026-10-20 Pierre-Bénite, France	Electroactive PVDF-TrFE flexible energy harvesting copolymer films	RFQ ›
Kinetic Energy Harvesting Films Piezotech (Arkema Group) — Kinetic Energy Harvesting Films Engineering Profile Electroactive PVDF-TrFE flexible energy harvesting copolymer films Key Specs: PVDF membrane, voltage output, flexible Facility: Pierre-Bénite, France piezotech.com Website did not answer as this company on 2026-10-20 DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — no answer The listed website did not return this company’s own page on the check date. (TLS error (ERR_TLS_CERT_ALTNAME_INVALID); plain http:// answers and redirects to pernoferr.com) piezotech.com, not linked · checked 2026-10-20 Site says it serves medical devices — not checked site not read (TLS error (ERR_TLS_CERT_ALTNAME_INVALID); plain http:// answers and redirects to pernoferr.com). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored site not read (TLS error (ERR_TLS_CERT_ALTNAME_INVALID); plain http:// answers and redirects to pernoferr.com). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked site not read (TLS error (ERR_TLS_CERT_ALTNAME_INVALID); plain http:// answers and redirects to pernoferr.com). Could not be checked, so it counts neither way. FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: FR. what was checked ↗ · checked 2026-10-20

Serpentine Stretchable Interconnects

↑ Grid

Key Specs: screen-printed conductive silver-TPU, 50% elongation

Meander-patterned conductive elastomer and silver traces laminated onto elastic polyurethane films to accommodate body contours and skin deformation.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Dual-Wavelength SpO2 Optical Emitters

↑ Grid

Key Specs: 660nm Red / 940nm IR LEDs, silicon PIN photodiode

Matched optoelectronic emitter and detector assemblies mounted in silicone finger clips or adhesive wraps for non-invasive blood oxygen saturation telemetry.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

PVDF Arterial Waveform Film Sensors

↑ Grid

Key Specs: polarized polyvinylidene fluoride, high d33 coefficient

Piezoelectric polymer thin films mounted over peripheral arteries to measure continuous blood pressure waveforms and arterial stiffness non-invasively.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Seals & O-Rings

↑ Grid

Key Specs: ID, wall, material

Elastomeric seals. ID versus OD versus wall is the classic ordering mistake, which is why they carry glyphs.

Supplier	Stated Capabilities & Technical Focus	Procurement
Apple Rubber Products Lancaster, NY, USA	Microminiature O-rings in medical-grade silicone, FKM, EPDM	RFQ ›
Seals & O-Rings Apple Rubber Products — Seals & O-Rings Engineering Profile Microminiature O-rings in medical-grade silicone, FKM, EPDM Key Specs: ID, wall, material Facility: Lancaster, NY, USA Visit Apple Rubber Products website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “Safety: Ensures that medical devices function as” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: seal · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: NY. what was checked ↗ · checked 2026-10-20
Bal Seal Engineering Foothill Ranch, CA, USA	Spring-energized PTFE seals for low friction, sterilizable fluid handles	RFQ ›
Seals & O-Rings Bal Seal Engineering — Seals & O-Rings Engineering Profile Spring-energized PTFE seals for low friction, sterilizable fluid handles Key Specs: ID, wall, material Facility: Foothill Ranch, CA, USA Visit Bal Seal Engineering website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “protects millions of medical devices and critical” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: seal · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: CA. what was checked ↗ · checked 2026-10-20
Trelleborg Sealing Solutions Fort Wayne, IN, USA / Stuttgart, Germany	Liquid silicone rubber (LSR) injection molded seals and Class VI O-rings	RFQ ›
Seals & O-Rings Trelleborg Sealing Solutions — Seals & O-Rings Engineering Profile Liquid silicone rubber (LSR) injection molded seals and Class VI O-rings Key Specs: ID, wall, material Facility: Fort Wayne, IN, USA / Stuttgart, Germany Visit Trelleborg Sealing Solutions website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “solutions for demanding medical device, biotech and” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: seals · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 11 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: IN, DE. what was checked ↗ · checked 2026-10-20

Machined Components

↑ Grid

Key Specs: material, tolerance

Turned and milled parts — the general class that covers most reusable-instrument hardware.

Supplier	Stated Capabilities & Technical Focus	Procurement
Norman Noble Highland Heights, OH, USA	Micromachining, Swiss turning, milling for implants and surgical instruments FDA registered · FEI 3002755653	RFQ ›
Machined Components Norman Noble — Machined Components Engineering Profile Micromachining, Swiss turning, milling for implants and surgical instruments Key Specs: material, tolerance Facility: Highland Heights, OH, USA Visit Norman Noble website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — not checked no readable page text (content needs JavaScript). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored no readable page text (content needs JavaScript). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked no readable page text (content needs JavaScript). Could not be checked, so it counts neither way. FDA establishment registration — found Registered as NORMAN NOBLE, INC.: FEI 3002755653; Contract Manufacturer; Highland Heights, OH · FDA record ↗ · checked 2026-10-20
ARCH Medical Solutions archgp.com Website did not answer as this company on 2026-10-20 Bloomsburg, PA, USA	High-tolerance CNC machining of titanium, 17-4PH stainless, and PEEK components FDA registered · FEI 3006791286	RFQ ›
Machined Components ARCH Medical Solutions — Machined Components Engineering Profile High-tolerance CNC machining of titanium, 17-4PH stainless, and PEEK components Key Specs: material, tolerance Facility: Bloomsburg, PA, USA archgp.com Website did not answer as this company on 2026-10-20 DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — no answer The listed website did not return this company’s own page on the check date. (TLS error (ERR_TLS_CERT_ALTNAME_INVALID); plain http:// answers and redirects to archglobalprecision.com) archgp.com, not linked · checked 2026-10-20 Site says it serves medical devices — not checked site not read (TLS error (ERR_TLS_CERT_ALTNAME_INVALID); plain http:// answers and redirects to archglobalprecision.com). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored site not read (TLS error (ERR_TLS_CERT_ALTNAME_INVALID); plain http:// answers and redirects to archglobalprecision.com). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked site not read (TLS error (ERR_TLS_CERT_ALTNAME_INVALID); plain http:// answers and redirects to archglobalprecision.com). Could not be checked, so it counts neither way. FDA establishment registration — found Registered as ARCH MEDICAL SOLUTIONS - PHILADELPHIA, LLC DBA JADE PRECISION MEDICAL COMPONENTS: FEI 3006791286; Contract Manufacturer; Huntingdon Valley, PA · FDA record ↗ · checked 2026-10-20
Paragon Medical Pierceton, IN, USA	Complex metal and polymer machined assemblies for surgical and robotic tools FDA registered · FEI 3001814066	RFQ ›
Machined Components Paragon Medical — Machined Components Engineering Profile Complex metal and polymer machined assemblies for surgical and robotic tools Key Specs: material, tolerance Facility: Pierceton, IN, USA Visit Paragon Medical website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — not checked blocked automated access (HTTP 429). Could not be checked, so it counts neither way. Site says it serves medical devices — not checked site not read (blocked automated access (HTTP 429)). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored site not read (blocked automated access (HTTP 429)). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked site not read (blocked automated access (HTTP 429)). Could not be checked, so it counts neither way. FDA establishment registration — found Registered as Paragon Medical Inc.: FEI 3001814066; Contract Manufacturer; Castleton, IN · FDA record ↗ · checked 2026-10-20

Oleophobic Acoustic Vents

↑ Grid

Key Specs: IP68, ePTFE membrane, acoustic transmission loss

Microporous ePTFE membranes protecting internal sensors, microphones, and barometric transducers from moisture and body sweat.

Supplier	Stated Capabilities & Technical Focus	Procurement
Donaldson Company Bloomington, MN, USA	Tetratex ePTFE breathable acoustic barrier vents for medical devices	RFQ ›
Oleophobic Acoustic Vents Donaldson Company — Oleophobic Acoustic Vents Engineering Profile Tetratex ePTFE breathable acoustic barrier vents for medical devices Key Specs: IP68, ePTFE membrane, acoustic transmission loss Facility: Bloomington, MN, USA Visit Donaldson Company website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “Air Purification for Industrial and Medical Applications” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: vents · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MN. what was checked ↗ · checked 2026-10-20
W. L. Gore & Associates Newark, DE, USA	Gore Medical Acoustic Vents (ePTFE oleophobic IP68 waterproof membranes)	RFQ ›
Oleophobic Acoustic Vents W. L. Gore & Associates — Oleophobic Acoustic Vents Engineering Profile Gore Medical Acoustic Vents (ePTFE oleophobic IP68 waterproof membranes) Key Specs: IP68, ePTFE membrane, acoustic transmission loss Facility: Newark, DE, USA Visit W. L. Gore & Associates website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “drug, cosmetic or medical device manufacturing, processing,” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: vent · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. Closest wording found: “operate according to ISO 13485 and ISO 15378”, not counted (qualified: "according"). what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: DE. what was checked ↗ · checked 2026-10-20
Saint-Gobain Life Sciences Gaithersburg, MD, USA	Precision die-cut hydrophobic acoustic membranes and pressure relief vents	RFQ ›
Oleophobic Acoustic Vents Saint-Gobain Life Sciences — Oleophobic Acoustic Vents Engineering Profile Precision die-cut hydrophobic acoustic membranes and pressure relief vents Key Specs: IP68, ePTFE membrane, acoustic transmission loss Facility: Gaithersburg, MD, USA Visit Saint-Gobain Life Sciences website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — not checked blocked automated access (HTTP 403). Could not be checked, so it counts neither way. Site says it serves medical devices — not checked site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MD. what was checked ↗ · checked 2026-10-20

Coin-Cell Leaf Spring Contacts

↑ Grid

Key Specs: gold-plated beryllium copper, high fatigue, CR2032 fit

Stamped BeCu or phosphor bronze spring terminals delivering stable electrical contact to coin cells despite continuous patient vibration and motion.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Moisture-Vapor Permeable TPU Films

↑ Grid

Key Specs: monolithic barrier, MVTR >3000g/m²/day, liquid viral proof

Thin thermoplastic polyurethane barrier membranes that allow skin perspiration to evaporate while barring liquid water, bacteria, and viral pathogens.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Skin Interface & Sensing

Flexible Electronics & Signal

Protective Enclosure

Component Catalog & Supplier Offerings

Avery Dennison Medical — Medical Skin Adhesives Engineering Profile

Scapa Healthcare (SWM) — Medical Skin Adhesives Engineering Profile

3M Medical Materials & Technologies — Medical Skin Adhesives Engineering Profile

Conductive Technologies — Biosensing Electrodes Engineering Profile

ScreenTec — Biosensing Electrodes Engineering Profile

Ambu A/S — Biosensing Electrodes Engineering Profile

Resonetics — Continuous Sensing Microneedles Engineering Profile

Corium, Inc. — Continuous Sensing Microneedles Engineering Profile

3M Medical Materials — Continuous Sensing Microneedles Engineering Profile

Katecho — Solid Electrolyte Hydrogels Engineering Profile

Scapa Healthcare — Solid Electrolyte Hydrogels Engineering Profile

Sekisui Diagnostics — Solid Electrolyte Hydrogels Engineering Profile

Cicor Group — Flexible Sensor Circuits Engineering Profile

Minco Products — Flexible Sensor Circuits Engineering Profile

Multek (WNC) — Flexible Sensor Circuits Engineering Profile

Amphenol Alden Products — Cables Engineering Profile

TE Connectivity — Cables Engineering Profile

Minnesota Wire & Cable — Cables Engineering Profile

PI Ceramic — Kinetic Energy Harvesting Films Engineering Profile

Smart Material Corp. — Kinetic Energy Harvesting Films Engineering Profile

Piezotech (Arkema Group) — Kinetic Energy Harvesting Films Engineering Profile

Apple Rubber Products — Seals & O-Rings Engineering Profile

Bal Seal Engineering — Seals & O-Rings Engineering Profile

Trelleborg Sealing Solutions — Seals & O-Rings Engineering Profile

Norman Noble — Machined Components Engineering Profile

ARCH Medical Solutions — Machined Components Engineering Profile

Paragon Medical — Machined Components Engineering Profile

Donaldson Company — Oleophobic Acoustic Vents Engineering Profile

W. L. Gore & Associates — Oleophobic Acoustic Vents Engineering Profile

Saint-Gobain Life Sciences — Oleophobic Acoustic Vents Engineering Profile