Component Atlas

Fluid Delivery

Fittings, valves, and the paths between them.

14 categories | Component Atlas › Fluid Delivery

About
How can we improve? — not open yet

About fluid paths and connections Most of the engineering in a fluid path is in the joints, and most of the risk is in what could be connected to what.

Why connectors are a safety subject

A connector that mates with an unintended system is a misconnection hazard, and it has historically been a fatal one. That is the reason small-bore connectors moved to an application-specific series rather than one universal taper.

Choosing a connector is therefore a decision about which systems must NOT connect, as much as about which must.

Dead volume and priming

Every fitting, valve and manifold adds volume that has to be primed and then either delivered or wasted. In a low-volume delivery this is a functional requirement, not a detail.

It also sets how hard the path is to clear of air, which is usually the thing a user actually complains about.

Standards that actually apply

ISO 80369: Small-bore connectors for liquids and gases. The series exists specifically to make cross-application misconnection physically impossible.

Listed because they bear on the choices above — not as a compliance checklist, and not as advice about which apply to your device.

☰ Jump to Component (14) ▾

14 components

Sealing

Seals & O-Rings
Rapid Infusion Pressure Cuffs
Extruded Dialysis Bloodlines
Infusion Drip Chambers with Filters
Inline Anti-Free-Flow Check Valves
Hemodialysis Hollow-Fiber Dialyzers
Micro-Capillary Flow Restrictors

Component Catalog & Supplier Offerings

Click any component in the visual grid above to jump to its engineering specifications and listed suppliers below. Click any supplier row for its stated focus, the evidence behind its rating, and one-click RFQ formulation.

Listed from public sources. Not contacted or endorsed by 10xAnd. Evidence ratings count checks against public sources — how they work.

Luer Fittings

↑ Grid

Key Specs: ISO 80369-7, sex

Male and female luer connectors for fluid paths, specified by ISO 80369-7.

📐 Standard Stock Sizes & Scales

Standard ISO 80369-7 Luer Lock Connectors & Barbed Adaptors

ISO 80369-7:2021 (Intravascular or Hypodermic Luer Applications)

Select Configuration & Tubing Barb:

Draft RFQ for Selected Size ›

Type: Male Lock Barb ID: 0.0625″ (1.6 mm) Material: Radiation-stable PP / PC Target: Infusion pump tubing, micro-bore lines

Toggle Complete Stock Size Table (8 sizes)

Configuration	Type	Barb ID (in)	Barb (mm)	Material	Application	Action
Male Luer Lock to 1/16″ (1.6 mm) Barb	Male Lock	0.0625″	1.6	Radiation-stable PP / PC	Infusion pump tubing, micro-bore lines	RFQ ›
Male Luer Lock to 3/32″ (2.4 mm) Barb	Male Lock	0.0938″	2.4	Polycarbonate (USP Class VI)	Standard IV line extension, syringe pump	RFQ ›
Male Luer Lock to 1/8″ (3.2 mm) Barb	Male Lock	0.1250″	3.2	Polycarbonate / Kynar	Manifold fluid delivery, pressure monitoring	RFQ ›
Male Luer Lock to 5/32″ (4.0 mm) Barb	Male Lock	0.1563″	4.0	Polycarbonate	High-flow fluid irrigation & drainage lines	RFQ ›
Female Luer Lock to 1/16″ (1.6 mm) Barb	Female Lock	0.0625″	1.6	Polypropylene / PC	Catheter proximal hub interface	RFQ ›
Female Luer Lock to 3/32″ (2.4 mm) Barb	Female Lock	0.0938″	2.4	Polypropylene / PC	Standard venous access hub	RFQ ›
Female Luer Lock to 1/8″ (3.2 mm) Barb	Female Lock	0.1250″	3.2	Polycarbonate	Multi-lumen catheter junction	RFQ ›
Female Luer to 1/4-28 UNF Flat-Bottom Thread	Female to Thread	1/4-28 UNF	—	316L Stainless / PEEK	High-pressure chromatography & HPLC fluidics	RFQ ›

Supplier	Stated Capabilities & Technical Focus	Procurement
Nordson Medical Fort Collins, CO, USA	Precision molded luers, tube-to-luer barb connectors with zero flash ISO 13485 stated on site	RFQ ›
Luer Fittings Nordson Medical — Luer Fittings Engineering Profile Precision molded luers, tube-to-luer barb connectors with zero flash Key Specs: ISO 80369-7, sex Facility: Fort Collins, CO, USA Visit Nordson Medical website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “Delivering advanced cardiovascular surgical devices—including myocardial protection” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: luers · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485 and 14971 Risk Management certified” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MN. what was checked ↗ · checked 2026-10-20
Qosina Ronkonkoma, NY, USA	Vast inventory of ISO 80369-7 compliant male and female luers in lipid-resistant PC ISO 13485 stated on site	RFQ ›
Luer Fittings Qosina — Luer Fittings Engineering Profile Vast inventory of ISO 80369-7 compliant male and female luers in lipid-resistant PC Key Specs: ISO 80369-7, sex Facility: Ronkonkoma, NY, USA Visit Qosina website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “You to the Medical Components You Need” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: luer · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: NY. what was checked ↗ · checked 2026-10-20
Ark-Plas Products ark-plas.com Website did not answer as this company on 2026-10-20 Flippin, AR, USA	Miniature plastic fittings, check valves, and luer lock adapters	RFQ ›
Luer Fittings Ark-Plas Products — Luer Fittings Engineering Profile Miniature plastic fittings, check valves, and luer lock adapters Key Specs: ISO 80369-7, sex Facility: Flippin, AR, USA ark-plas.com Website did not answer as this company on 2026-10-20 DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — no answer The listed website did not return this company’s own page on the check date. (TLS certificate expired) ark-plas.com, not linked · checked 2026-10-20 Site says it serves medical devices — not checked site not read (TLS certificate expired). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored site not read (TLS certificate expired). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked site not read (TLS certificate expired). Could not be checked, so it counts neither way. FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: AR. what was checked ↗ · checked 2026-10-20

Stopcocks & Manifolds

↑ Grid

Key Specs: ports, bore

Multi-port fluid control bodies.

Supplier	Stated Capabilities & Technical Focus	Procurement
Elcam Medical BarAm, Israel / Hackensack, NJ, USA	OEM fluid management stopcocks, integrated transducer manifolds, sterile flow control ISO 13485 stated on site FDA registered · FEI 3002806901	RFQ ›
Stopcocks & Manifolds Elcam Medical — Stopcocks & Manifolds Engineering Profile OEM fluid management stopcocks, integrated transducer manifolds, sterile flow control Key Specs: ports, bore Facility: BarAm, Israel / Hackensack, NJ, USA Visit Elcam Medical website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “a leading force in medical device manufacturing.” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: stopcocks · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “Elcam Medical ACAL ISO 13485 : 2016” · source ↗ · checked 2026-10-20 FDA establishment registration — found Registered as ELCAM MEDICAL A.C.A.L.: FEI 3002806901; Contract Manufacturer, Manufacturer; D.n. Merom Hagalil Northern, IL · FDA record ↗ · checked 2026-10-20
Nordson Medical Fort Collins, CO, USA	Multi-port manifolds and polycarbonate directional valves for fluid delivery ISO 13485 stated on site	RFQ ›
Stopcocks & Manifolds Nordson Medical — Stopcocks & Manifolds Engineering Profile Multi-port manifolds and polycarbonate directional valves for fluid delivery Key Specs: ports, bore Facility: Fort Collins, CO, USA Visit Nordson Medical website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “Delivering advanced cardiovascular surgical devices—including myocardial protection” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: stopcocks · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485 and 14971 Risk Management certified” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MN. what was checked ↗ · checked 2026-10-20
Qosina Ronkonkoma, NY, USA	1-way to 4-way stopcocks, high-pressure manifolds with luer ports ISO 13485 stated on site	RFQ ›
Stopcocks & Manifolds Qosina — Stopcocks & Manifolds Engineering Profile 1-way to 4-way stopcocks, high-pressure manifolds with luer ports Key Specs: ports, bore Facility: Ronkonkoma, NY, USA Visit Qosina website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “You to the Medical Components You Need” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: stopcock · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: NY. what was checked ↗ · checked 2026-10-20

Split-Septum Needleless Valves

↑ Grid

Key Specs: swabable silicone, neutral displacement, 325 psi

Disinfectable closed-system split-septum valves providing high-flow fluid access while preventing needle sticks and bloodstream infections.

Supplier	Stated Capabilities & Technical Focus	Procurement
Halkey-Roberts St. Petersburg, FL, USA	Swabable silicone needleless injection valves and infusion ports FDA registered · FEI 1000324175	RFQ ›
Split-Septum Needleless Valves Halkey-Roberts — Split-Septum Needleless Valves Engineering Profile Swabable silicone needleless injection valves and infusion ports Key Specs: swabable silicone, neutral displacement, 325 psi Facility: St. Petersburg, FL, USA Visit Halkey-Roberts website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “50 years of medical device experience, we” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: swabable · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not checked group statement does not name the company. Could not be checked, so it counts neither way. FDA establishment registration — found Registered as Halkey-Roberts Corporation: FEI 1000324175; Contract Manufacturer; Saint Petersburg, FL · FDA record ↗ · checked 2026-10-20
ICU Medical OEM San Clemente, CA, USA	MicroClave neutral displacement needle-free IV access connectors FDA registered · FEI 2024064	RFQ ›
Split-Septum Needleless Valves ICU Medical OEM — Split-Septum Needleless Valves Engineering Profile MicroClave neutral displacement needle-free IV access connectors Key Specs: swabable silicone, neutral displacement, 325 psi Facility: San Clemente, CA, USA Visit ICU Medical OEM website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “premarket approval for medical devices used in” · source ↗ · checked 2026-10-20 Site names this capability — not found information only, not scored This category’s capability terms were not all found on the pages read. Looked for: “needle*free” or “needleless” or “needle-free” or “luer activated” or “swabable” or “split septum”. what was checked ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — found Registered as ICU MEDICAL, INC.: FEI 2024064; Specification Developer, Manufacturer; San Diego, CA · FDA record ↗ · checked 2026-10-20
Qosina Ronkonkoma, NY, USA	Swabable luer-activated split-septum silicone valves in stock for fast delivery ISO 13485 stated on site	RFQ ›
Split-Septum Needleless Valves Qosina — Split-Septum Needleless Valves Engineering Profile Swabable luer-activated split-septum silicone valves in stock for fast delivery Key Specs: swabable silicone, neutral displacement, 325 psi Facility: Ronkonkoma, NY, USA Visit Qosina website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “You to the Medical Components You Need” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: needleless · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: NY. what was checked ↗ · checked 2026-10-20

Vascular Fistula Needles

↑ Grid

Key Specs: slotted back-eye, textured wings, siliconized

Ultra-thin wall siliconized vascular access cannulae with oval back-eye holes maximizing laminar blood flow in arteriovenous fistulas.

Supplier	Stated Capabilities & Technical Focus	Procurement
Terumo Medical OEM Somerset, NJ, USA	Precision venous access fistula needles with rotating textured wings FDA registered · FEI 2243441	RFQ ›
Vascular Fistula Needles Terumo Medical OEM — Vascular Fistula Needles Engineering Profile Precision venous access fistula needles with rotating textured wings Key Specs: slotted back-eye, textured wings, siliconized Facility: Somerset, NJ, USA Visit Terumo Medical OEM website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “leading manufacturers of medical devices and supplies.” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: needles · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — found Registered as TERUMO MEDICAL CORP.: FEI 2243441; Export-Only Manufacturer, Specification Developer; Somerset, NJ · FDA record ↗ · checked 2026-10-20
Merit Medical OEM South Jordan, UT, USA	High-flow hemodialysis access needles with color-coded luer hubs	RFQ ›
Vascular Fistula Needles Merit Medical OEM — Vascular Fistula Needles Engineering Profile High-flow hemodialysis access needles with color-coded luer hubs Key Specs: slotted back-eye, textured wings, siliconized Facility: South Jordan, UT, USA Visit Merit Medical OEM website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “supplier of field-proven medical devices and components” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: needles · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: UT. what was checked ↗ · checked 2026-10-20
Nipro Medical nipromed.com Website did not answer as this company on 2026-10-20 Osaka, Japan / Bridgewater, NJ, USA	Ultra-thin wall siliconized AV fistula needles with back-eye slots FDA registered · FEI 3002807725	RFQ ›
Vascular Fistula Needles Nipro Medical — Vascular Fistula Needles Engineering Profile Ultra-thin wall siliconized AV fistula needles with back-eye slots Key Specs: slotted back-eye, textured wings, siliconized Facility: Osaka, Japan / Bridgewater, NJ, USA nipromed.com Website did not answer as this company on 2026-10-20 DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — no answer The listed website did not return this company’s own page on the check date. (domain does not resolve (DNS)) nipromed.com, not linked · checked 2026-10-20 Site says it serves medical devices — not checked site not read (domain does not resolve (DNS)). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored site not read (domain does not resolve (DNS)). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked site not read (domain does not resolve (DNS)). Could not be checked, so it counts neither way. FDA establishment registration — found Registered as NIPRO MEDICAL INDUSTRIES LTD.: FEI 3002807725; Contract Manufacturer, Manufacturer; Tatebayashi-Shi Gunma, JP · FDA record ↗ · checked 2026-10-20

Precision IV Tubing Roller Clamps

↑ Grid

Key Specs: wedge ramp, polypropylene wheel, calibrated shutoff

Molded two-piece variable pinch clamps with grooved wheels rolling along inclined ramps to regulate gravity infusion drip flow from dropwise to shutoff.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Multi-Gang High-Pressure Manifolds

↑ Grid

Key Specs: 3-gang / 4-gang blocks, 500 psi rated, rotating luer collars

Monolithic polycarbonate valve blocks connecting multiple infusion, pressure monitoring, and contrast lines to a single patient vascular catheter line.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Swabable Needleless Luer Access Valves

↑ Grid

Key Specs: split silicone septum, flat swabable face, microbiological barrier

Luer-activated valves with smooth, easily disinfected elastomeric top surfaces that open under luer engagement and seal automatically upon disconnect.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Seals & O-Rings

↑ Grid

Key Specs: ID, wall, material

Elastomeric seals. ID versus OD versus wall is the classic ordering mistake, which is why they carry glyphs.

Supplier	Stated Capabilities & Technical Focus	Procurement
Apple Rubber Products Lancaster, NY, USA	Microminiature O-rings in medical-grade silicone, FKM, EPDM	RFQ ›
Seals & O-Rings Apple Rubber Products — Seals & O-Rings Engineering Profile Microminiature O-rings in medical-grade silicone, FKM, EPDM Key Specs: ID, wall, material Facility: Lancaster, NY, USA Visit Apple Rubber Products website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “Safety: Ensures that medical devices function as” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: seal · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: NY. what was checked ↗ · checked 2026-10-20
Bal Seal Engineering Foothill Ranch, CA, USA	Spring-energized PTFE seals for low friction, sterilizable fluid handles	RFQ ›
Seals & O-Rings Bal Seal Engineering — Seals & O-Rings Engineering Profile Spring-energized PTFE seals for low friction, sterilizable fluid handles Key Specs: ID, wall, material Facility: Foothill Ranch, CA, USA Visit Bal Seal Engineering website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “protects millions of medical devices and critical” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: seal · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: CA. what was checked ↗ · checked 2026-10-20
Trelleborg Sealing Solutions Fort Wayne, IN, USA / Stuttgart, Germany	Liquid silicone rubber (LSR) injection molded seals and Class VI O-rings	RFQ ›
Seals & O-Rings Trelleborg Sealing Solutions — Seals & O-Rings Engineering Profile Liquid silicone rubber (LSR) injection molded seals and Class VI O-rings Key Specs: ID, wall, material Facility: Fort Wayne, IN, USA / Stuttgart, Germany Visit Trelleborg Sealing Solutions website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “solutions for demanding medical device, biotech and” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: seals · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 11 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: IN, DE. what was checked ↗ · checked 2026-10-20

Rapid Infusion Pressure Cuffs

↑ Grid

Key Specs: 300 mmHg gauge, translucent mesh, bladder

Inflatable pressure sleeves enclosing IV bags to deliver rapid pressurized intravenous fluids and blood products during trauma resuscitation.

Supplier	Stated Capabilities & Technical Focus	Procurement
Qosina Ronkonkoma, NY, USA	Stock pneumatic pressure infusers and bulb pump assemblies ISO 13485 stated on site	RFQ ›
Rapid Infusion Pressure Cuffs Qosina — Rapid Infusion Pressure Cuffs Engineering Profile Stock pneumatic pressure infusers and bulb pump assemblies Key Specs: 300 mmHg gauge, translucent mesh, bladder Facility: Ronkonkoma, NY, USA Visit Qosina website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “You to the Medical Components You Need” · source ↗ · checked 2026-10-20 Site names this capability — not found information only, not scored This category’s capability terms were not all found on the pages read. Looked for: “pressure infusor…” or “infusion cuff…” or “pressure infusion” or “pressure bag…”. what was checked ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485” · source ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: NY. what was checked ↗ · checked 2026-10-20
Teleflex Medical OEM Limerick, Ireland	Rapid blood and fluid pressure infusors with thumb-wheel release valves FDA registered · FEI 3007134520	RFQ ›
Rapid Infusion Pressure Cuffs Teleflex Medical OEM — Rapid Infusion Pressure Cuffs Engineering Profile Rapid blood and fluid pressure infusors with thumb-wheel release valves Key Specs: 300 mmHg gauge, translucent mesh, bladder Facility: Limerick, Ireland Visit Teleflex Medical OEM website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “co-development partner, Teleflex Medical OEM supports industry” · source ↗ · checked 2026-10-20 Site names this capability — not found information only, not scored This category’s capability terms were not all found on the pages read. Looked for: “pressure infusor…” or “infusion cuff…” or “pressure infusion” or “pressure bag…”. what was checked ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 9 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — found Registered as TELEFLEX MEDICAL: FEI 3007134520; Specification Developer, Manufacturer; Athlone Westmeath, IE · FDA record ↗ · checked 2026-10-20
Merit Medical OEM South Jordan, UT, USA	Heavy-duty nylon pressure infusion sleeves with color-coded manometer gauges	RFQ ›
Rapid Infusion Pressure Cuffs Merit Medical OEM — Rapid Infusion Pressure Cuffs Engineering Profile Heavy-duty nylon pressure infusion sleeves with color-coded manometer gauges Key Specs: 300 mmHg gauge, translucent mesh, bladder Facility: South Jordan, UT, USA Visit Merit Medical OEM website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “supplier of field-proven medical devices and components” · source ↗ · checked 2026-10-20 Site names this capability — not found information only, not scored This category’s capability terms were not all found on the pages read. Looked for: “pressure infusor…” or “infusion cuff…” or “pressure infusion” or “pressure bag…”. what was checked ↗ · checked 2026-10-20 Site states ISO 13485 certification — not found No statement of current ISO 13485 certification was found on the pages read. “Working toward” or “planned” does not count. (no ISO 13485 mention on 10 pages read) what was checked ↗ · checked 2026-10-20 FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: UT. what was checked ↗ · checked 2026-10-20

Extruded Dialysis Bloodlines

↑ Grid

Key Specs: DEHP-free PVC, low hemolysis, bubble trap

Precision medical-grade tubing circuits with integral drip chambers, pump segments, and transducer protectors for hemodialysis machines.

Supplier	Stated Capabilities & Technical Focus	Procurement
Freudenberg Medical Carpinteria, CA, USA	Precision cleanroom extrusion of DEHP-free medical PVC blood tubing ISO 13485 stated on site FDA registered · FEI 2025182	RFQ ›
Extruded Dialysis Bloodlines Freudenberg Medical — Extruded Dialysis Bloodlines Engineering Profile Precision cleanroom extrusion of DEHP-free medical PVC blood tubing Key Specs: DEHP-free PVC, low hemolysis, bubble trap Facility: Carpinteria, CA, USA Visit Freudenberg Medical website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “you bring your medical device or pharmaceutical” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: dialysis · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “ISO 13485:2016” · source ↗ · checked 2026-10-20 FDA establishment registration — found Registered as Freudenberg Medical, LLC: FEI 2025182; Manufacturer, Contract Manufacturer, Specification Developer; Carpinteria, CA · FDA record ↗ · checked 2026-10-20
Raumedic AG Helmbrechts, Germany / Mills River, NC, USA	Extruded hemodialysis tubing sets with low hemolysis profiles ISO 13485 stated on site FDA registered · FEI 3012232668	RFQ ›
Extruded Dialysis Bloodlines Raumedic AG — Extruded Dialysis Bloodlines Engineering Profile Extruded hemodialysis tubing sets with low hemolysis profiles Key Specs: DEHP-free PVC, low hemolysis, bubble trap Facility: Helmbrechts, Germany / Mills River, NC, USA Visit Raumedic AG website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — yes HTTP 200 · source ↗ · checked 2026-10-20 Site says it serves medical devices — found “solutions for medical and pharmaceutical applications, as” · source ↗ · checked 2026-10-20 Site names this capability — found information only, not scored Matched: dialysis · source ↗ · checked 2026-10-20 Site states ISO 13485 certification — found “Certificate ISO 13485” · source ↗ · checked 2026-10-20 FDA establishment registration — found Registered as RAUMEDIC, Incorporated.: FEI 3012232668; Contract Manufacturer; Mills River, NC · FDA record ↗ · checked 2026-10-20
Saint-Gobain Life Sciences Gaithersburg, MD, USA	Medical-grade bloodline assemblies and peristaltic pump segments	RFQ ›
Extruded Dialysis Bloodlines Saint-Gobain Life Sciences — Extruded Dialysis Bloodlines Engineering Profile Medical-grade bloodline assemblies and peristaltic pump segments Key Specs: DEHP-free PVC, low hemolysis, bubble trap Facility: Gaithersburg, MD, USA Visit Saint-Gobain Life Sciences website DRAFT RFQ SPECIFICATION › Attach 2D drawings (.dwg, .pdf) or 3D CAD (.step) to the RFQ. Evidence How evidence ratings work Website answers — not checked blocked automated access (HTTP 403). Could not be checked, so it counts neither way. Site says it serves medical devices — not checked site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. Site names this capability — not checked information only, not scored site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. Site states ISO 13485 certification — not checked site not read (blocked automated access (HTTP 403)). Could not be checked, so it counts neither way. FDA establishment registration — not found No active openFDA registration matched this listing by name and location. That is common and expected for component makers, which are generally exempt (21 CFR 807.65(a)), and it says nothing about sites elsewhere. Locations searched: MD. what was checked ↗ · checked 2026-10-20

Infusion Drip Chambers with Filters

↑ Grid

Key Specs: 15µm nylon mesh, 20 or 60 drops/mL dropper, clear PVC

Pliable transparent plastic chambers with calibrated stainless or plastic dropper orifices and internal particulate filters providing visual flow monitoring.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Inline Anti-Free-Flow Check Valves

↑ Grid

Key Specs: silicone diaphragm, 0.1 psi crack pressure, back-pressure rated

Normally closed elastomeric disc check valves that prevent secondary medication backflow into primary IV bags during multi-line infusion therapy.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Hemodialysis Hollow-Fiber Dialyzers

↑ Grid

Key Specs: polysulfone membrane, 1.8m² surface area, endotoxin cut-off

Cylindrical plastic cartridges containing thousands of semipermeable hollow fiber capillaries that filter metabolic toxins and excess water from uremic blood.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Micro-Capillary Flow Restrictors

↑ Grid

Key Specs: sapphire orifice / glass capillary, 0.5–10 mL/hr, fixed rate

Precision micro-bore capillary restrictors calibrated to deliver precise basal medication infusion rates driven by elastomeric balloon reservoirs.

Supplier	Stated Capabilities & Technical Focus	Evidence	Procurement
No suppliers listed for this category yet.

Why connectors are a safety subject

Dead volume and priming

Standards that actually apply

Connections

Sealing

Component Catalog & Supplier Offerings

Standard ISO 80369-7 Luer Lock Connectors & Barbed Adaptors

Nordson Medical — Luer Fittings Engineering Profile

Qosina — Luer Fittings Engineering Profile

Ark-Plas Products — Luer Fittings Engineering Profile

Elcam Medical — Stopcocks & Manifolds Engineering Profile

Nordson Medical — Stopcocks & Manifolds Engineering Profile

Qosina — Stopcocks & Manifolds Engineering Profile

Halkey-Roberts — Split-Septum Needleless Valves Engineering Profile

ICU Medical OEM — Split-Septum Needleless Valves Engineering Profile

Qosina — Split-Septum Needleless Valves Engineering Profile

Terumo Medical OEM — Vascular Fistula Needles Engineering Profile

Merit Medical OEM — Vascular Fistula Needles Engineering Profile

Nipro Medical — Vascular Fistula Needles Engineering Profile

Apple Rubber Products — Seals & O-Rings Engineering Profile

Bal Seal Engineering — Seals & O-Rings Engineering Profile

Trelleborg Sealing Solutions — Seals & O-Rings Engineering Profile

Qosina — Rapid Infusion Pressure Cuffs Engineering Profile

Teleflex Medical OEM — Rapid Infusion Pressure Cuffs Engineering Profile

Merit Medical OEM — Rapid Infusion Pressure Cuffs Engineering Profile

Freudenberg Medical — Extruded Dialysis Bloodlines Engineering Profile

Raumedic AG — Extruded Dialysis Bloodlines Engineering Profile

Saint-Gobain Life Sciences — Extruded Dialysis Bloodlines Engineering Profile