What this makes, and what it does not

Device Demo Studio puts your device model on a schematic route and records it travelling from the access site to the landmark you choose. It is for explaining a product: a sales deck, a trade-show loop, an investor update.

It is an illustration, not a simulation. The device moves along a drawn centreline. Nothing models bending, friction, tissue or whether a real device could be delivered that way, and the anatomy is not from any patient.

Getting a model

STEP is preferred: it is exact, and the page converts it to a mesh locally. STL, OBJ and GLB load directly. If all you have is photos, the FAQ below lists the usual ways to turn them into a mesh.

The pre-flight check reports the triangle count, open edges (holes in the mesh) and the bounding box in millimetres before anything renders, so a broken export or a units mistake shows up first.

Need more than a schematic?

If you need anatomy beyond these five routes, or a produced edit, tell us the device and the procedure with the form below. A person reads it and replies.

Questions we get

Is my CAD file uploaded?

No. The file is read, converted and rendered by your browser. Nothing about the model is sent to 10xAnd. The only network requests are for the open-source three.js and occt-import-js libraries, from jsDelivr.

What if I only have photos of the device?

Ask your CAD vendor or contract manufacturer for a STEP or STL first: it is faster and exact. Otherwise a photogrammetry app such as Polycam, KIRI Engine or RealityScan (phone), or Meshroom or RealityCapture (desktop), turns 30 to 100 photos into an OBJ or STL mesh. Shiny metal, clear polymer and thin wires defeat photo tools; for those a structured-light scanning service works better. We have no relationship with any of these. A photo mesh is approximate, so say so in the video.

How accurate is the anatomy?

It is schematic. Landmark positions are drawn to read clearly on screen and lumen diameters are rounded typical adult values. It is meant to show where a device goes, not to show that it gets there. Every recording carries that disclaimer in the frame.

Can I use the video in marketing?

A video used to promote a device is labeling. Keep the route and anything said over it within the cleared or approved indications for use, and have it go through your normal promotional review.

Why does it say my device does not fit?

STL and OBJ files carry no units. A model exported in inches but read as millimetres comes out 25.4 times too small, and the reverse comes out too large. The scale check compares the widest cross-section with the narrowest schematic lumen on the route so the slip shows up before you record. Change the units selector and it re-checks.

The brief

Want a finished demo video made for you?

Tell us the device and the procedure. A person reads these and replies about a produced animation.